Claro Walnut SF3 Singlecut Bass Guitar


Posted on July 19, 2008 by Scott French

"This was the rare instrument I actuatlly built on spec and the whole thing just went quick and easy. I lucked into this beautiful and THICK Claro Walnut body blank that just perfectly fit with this singlecut SF3 bodystyle. I already had all the hardware and electronics around so this project came together in a matter of days. It ended up going to local person with some interesting stories and a great instrument collection."

BODY
SF3 Singlecut

FINISH
Oil & Wax

WEIGHT
7.98 lbs

Image
Body

One-Piece Claro Walnut Body
Carved Top with Recurve/Roundover
Flat Back with Roundover

Neck

31 3/16'' Scale Length
9-Piece Wenge and Maple Neck
Fretless Bloodwood Fingerboard with 30 Position Markers
12'' Fingerboard Radius
Aluminum Side Dots
Claro Walnut Headcap
Thin Neck Profile
2 Way Adjustable Truss Rod
1 11/16'' Throat Width
Individual Elements with Zero Fret

Hardware

Chrome Hardware Finish
Seymour Duncan P/J Pickups in Bloodwood Case
Gotoh Contour Adjustable Post Tuners
Schaller Bridge with 19mm Spacing and Bloodwood Anchor
Schaller Locking Strap Buttons
Figured Eucalyptus Back Panel and Trussrod Cover

Electronics

Volume/Tone/3-Way Pickup Selector
P Series/Parallel Switch
P-J Series/Parallel Switch